Products of Lorenz Messtechnik GmbH

Our manufacturing program includes torque sensors, force sensors, load cells as well as the corre­sponding measured data evaluation units. Furthermore customized system solutions and test benches for the acquisition of speed, torque, force and characteristics; special sensors and strain gauge installation. We offer DAkkS and proprietary calibrations for all of our sensors and devices. With the purchase of a new sensor a test certificate, which records the traceable measurement, is provided as standard.

Measurement Electronics

Sensor Interfaces

Analog Type Technical Details
Sensor Interface LCV LCV Strain Gauge (SG) Sensor-Interface for the Conversion of SG-based Sensor (e.g. Force and Torque Sensors or Load Cells) Output Signals to normed Voltage Signals of ±5V, ±10V, 0/4 ... 20 mA, 10±10 mA or 12±8 mA for the direct Connection to e.g. a PLC or Production Machine. By the high Level of Protection IP67 of the Housing, the Measuring ...
Sensor Interface SI-U - SI-I SI SG Measuring Amplifier for the Conversion of SG-based Sensor (e.g. Force and Torque Sensors or Load Cells) Output Signals to normed Voltage Signals of ±5V, ±10V, 0/4 ... 20 mA, 10±10 mA or 12±8 mA for the direct Connection to e.g. a PLC or Production Machine. Through its robust Aluminum Die Cast Housing with high Level of ...
Sensorinterface LMV LMV SG Measuring Amplifier for the Conversion of SG-based Sensor (e.g. Force and Torque Sensors or Load Cells) Output Signals to normed Voltage Signals of 1 ... 9V or 5±4V for the direct Connection to e.g. a PLC or Production Machine. Through the very small Dimensions of the Amplifier Board, this Measuring Amplifier allows direct ...
Digital Type Technical Details
Sensor Interface with USB: LCV-USB2 LCV-USB2 USB-Sensor-Interface with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V, 0/4 … 20 mA, 10±10 mA or 12±8 mA are suitable for the Connection. Through the Measuring Rate ...
2 Channel Sensor-Interface with USB: SI-USB SI-USB 2 Channel USB-Sensor-Interface with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up to ...
2 Channel Sensor-Interface with RS485: SI-RS485 SI-RS485 2 Channel RS485-Sensor-Interface with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the RS485 Interface. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up to...
2 Channel Ethernet-Sensor-Interface SI-ETH SI-ETH 2 Channel Ethernet-Sensor-Interface SI-ETH with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the Ethernet Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up ...
4 Channel Sensor-Interface with USB: SI-USB3 SI-USB3 4 Channel USB-Sensor-Interface with freely available Configuration and Evaluation Software VS3. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V, 0/4 … 20 mA, 10±10 mA or 12±8 mA are suitable for the Connection. Through the Measuring Rate of up ...

Association for Sensors and Measurement AMA

Authorised Economic Operator AEOF

DAkkS-Calibration Laboratory ILAC und DAkkS

Quality Management ISO 9001